Click on picture for more info

Hand Held Stopwatches

herwins 12 hr chrome.JPG (35442 bytes)

Herwins Swiss mechanical stopwatch. Black bezel.

Rally timer - 60 min and 12 hour sub dials
Appears to be very lightly used but still boxed - in excellent condition

Price 195.00

herwins 12 hr.JPG (38296 bytes)

Herwins Swiss mechanical stopwatch. Chrome bezel.

Rally timer -
60 min and 12 hour sub dials
Appears to be very lightly used but still boxed - in excellent condition

Price 195.00

minerva 12 hour.JPG (39228 bytes)

Minerva Swiss mechanical stopwatch. Chrome bezel.

Rally timer -
60 min and 12 hour sub dials
New old stock & boxed - in excellent condition

Price 245.00

ccp1.JPG (52585 bytes)

Russian jeweled mechanical stopwatch.

In excellent condition - Excellent value.

Price 65.00


herwins pair.JPG (30852 bytes)

Pair of Herwins Swiss mechanical stopwatches. Mounted on alloy backplate with period stopwatch clips.
Can be supplied on stainless steel backplate if preferred.

Second hand - in excellent condition
Price 225.00


cccp pair.JPG (35721 bytes)

Pair of Russian jeweled mechanical stopwatches. Mounted on alloy backplate with period stopwatch clips.
Can be supplied on stainless steel backplate if preferred.

Second hand - in excellent condition
Price 145.00


cccp3.JPG (31517 bytes)

Pair of Russian jeweled mechanical stopwatches. Mounted on s/s backplate with period stopwatch clips.
Can be supplied on alloy backplate if preferred.

Second hand - in excellent condition
Price 145.00

smiths rally clock.jpg (185510 bytes)

Smiths rallyclock (late 60's) with hack facility for setting accurate rally time, complete with lanyard. 

Like new old stock - pristine.


Price 195.00

smithpr1.jpg (95429 bytes)

Smiths rally clock and rally timer stopwatch with hack facility for setting accurate rally time. No mounting hardware - timers only

Price 425.00

 

omega1blk.JPG (10684 bytes)

OMEGA 'Olympic' - Very rare item!

A once in a lifetime there is a chance to get hold of a piece of motorsport history. The following watches will revive fond memories of UK marshals and competitors alike. Used for all forms of rally timing in the 60s & 70s but reportedly used at Olympic games some years before, these Omegas, in their original red cases are sure to be an investment for any Omega or motorsport enthusiast. They are available in limited numbers only while stocks last.

                                 Black Omega

Out of case              Black Omega 

We sold one of these timers to a renowned American collector Chuck Maddox way back in the 90s. Click here to visit his very informative web page about the timer. 

Price: 2000.00

 

omegawhite1.JPG (32305 bytes)

Omega found parts to re-create a replica of the 1932 Olympic watch and they appear to be selling for many thousand of pounds.
The only difference is these aren't modern re-creations.

Don't take my word though, click here to see the 'official' Omega story for yourself

Click here for details about the origins of this timer from the Omega website

              White Omega    White Omega out of case        

Price: 2750.00

backplate alloy both.JPG (43758 bytes)

screws2.GIF (29620 bytes)

Twin alloy (satin black) backplate for 2" stopwatches.

Adjustable stopwatch clips on machined alloy plate, satin black finish. 
Engineered to be flush at rear to mount on flat panel.

Includes four csk mounting screws washers and nuts.

Available in two sizes (approx):  
4"  x 2" (118mm x 57mm) 
5"  x 2" (140mm x 65mm)

Price 50.00

backplate stainless both 1.JPG (37160 bytes)
backplate stainless edge 1.JPG (35671 bytes)

screws1.gif (23166 bytes)

Twin stainless steel backplate for 2" stopwatches.

Adjustable stopwatch clips on machined stainless plate
Polished edges and brushed finish. 
Engineered to be flush at rear to mount on flat panel.

Includes four mounting screws washers and nuts.

Available in three sizes (approx):  
4⅜"  x 2" (112mm x 57mm) - Same as Heuer twin backplate
4"  x 2" (118mm x 57mm) 
5"  x 2" (140mm x 65mm)

Price 50.00

stopwatch clip1.jpg (113169 bytes)

Stopwatch clip

Adjustable Watch Clip for single stopwatch.
 Requires 5 mm hole in panel or board.

Price 11.95 each


twin backplate.jpg (103662 bytes)
screws2.GIF (29620 bytes)


Twin backplate for Heuer Mastertime, Monte Carlo, Sebring etc.

Heavy chrome plate on brass plate. (not genuine Heuer)
Includes four csk mounting screws washers and nuts. 

Dimentions - 2.25" x 4.5"
175.00

heuer backplate mod1.JPG (21707 bytes)
heuer backplate mod2.JPG (16862 bytes)
screws2.GIF (29620 bytes)

 

Twin backplate for Heuer Mastertime, Monte Carlo, Sebring etc.

Aircraft spec light alloy satin black plate and six timer mounting screws.
Includes four csk mounting screws washers and nuts.

Dimentions - 2.25" x 4.5"
125.00

heuer single backplate mod.JPG (25672 bytes)
screws2.GIF (29620 bytes)


Single backplate for Heuer Mastertime, Monte Carlo, Sebring etc.

MoD satin black plate - original MoD part number engraved.
Includes four csk mounting screws washers and nuts.

Dimentions - 2.25" x 4.5"
75.00

heuer single backplate1.JPG (39329 bytes)
screws2.GIF (29620 bytes)


Single backplate for Heuer Mastertime, Monte Carlo, Sebring etc.

Re-chromed genuine Heuer plate.
Includes four csk mounting screws washers and nuts.

Dimentions - 2.25" x 4.5"
75.00

heuer backplate aircraft.JPG (38292 bytes)
screws3.gif (8711 bytes)


Single backplate for Heuer Mastertime, Monte Carlo, Sebring etc.

Aircraft application, no ideas of type but has a part number written on and stamped into plate - believe to be original military. 
One mounting bracket has spacer to double thickness.
Includes three watch mounting screws.

Dimentions - 2.25" x 4.5"
25.00

ALL PRICES ARE PLUS POST & PACKING,
PLEASE CONTACT US FOR PRICE AS IT WILL DIFFER WITH SIZE AND WEIGHT OF PACKAGE.