|
BR9 - Retrotrip
2 |
Retrotrip 2 - Tripmeter Introducing the famous Brantz RetroTrip tripmeter. This unit has been specifically designed to compliment historic or retrospective motoring, and is approved for use on many major rallies. The RetroTrip has sufficient functions for all the major competitive historic events and features fiddle-proof electro-mechanical clicking digits. The unit offers instant 'one in a thousand' calibration for any wheel changes and, like all Brantz meters, accuracy is excellent. The RetroTrip can be used with a wide range of motion sensors: the wheel type sensor or speedometer type being the most popular. As ever, the fitting and calibration of the meter is a simple and efficient task. N.B. Older cars with 6V
electronics or poorly performing 12V charger systems should use the
|
|
|
|
||
|
Sizes
in mm |
£200.00 |
|
|
|
The RetroTrip 3 is a simple evolution of the ever popular RetroTrip 2 mechanical tripmeter. It has all the same features such as accurate one-in-a-thousand calibration and mechanical read-outs which make the tripmeters from Brantz eligible for historic type rallies throughout the world. Where the RetroTrip 3 differs is that it contains two completely separate and independent tripmeters in the same box. One tripmeter drives the normal two counters on the top row of the box, whilst a second tripmeter with it's own calibration system drives a third readout on the lower row. Both tripmeters are fed from the same single sensor fitted to either the speedometer cable or the road wheel. All counters can be zeroed independently while the counter on the top row can also be disconnected via a rocker control. N.B. Older cars with 6V electronics or poorly performing 12V charger systems should use the BRANTZ POWER CONDITIONER to produce a correct and reliable voltage source.
|
|
|
|
||
|
Sizes
in mm |
£250.00 |
|
|
BR13 - Brantz |
Brantz International 1 Tripmeter A basic International 1 single display tripmeter, ideal for road rallying and club level stage events. The International 1 features the same commitment to quality and accuracy as all Brantz tripmeters. Our excellent 0.6 inch light emitting display and accurate calibration systems are coupled with a power switch and fuse to offer the very best entry level tripmeter. |
|
|
|
||
|
Sizes
in mm |
£110.00 |
|
|
BR6 - Brantz |
Brantz International 2 Pro Tripmeter The International 2 is a highly accurate unit featuring very large light emitting displays of 0.6 inches and is ideal for stage rally applications where a dual readout is required. Brantz tripmeters calibrate electronically to indicate hundredths of a mile/kilometer, while a unique Brantz feature allows the Total readout to shift the decimal point of the distance meter to give a maximum value of 999.9 miles or kilometers - useful for the long distance competitions. Changes to wheel sizes or gearing ratios are instantly accommodated by the calibration. A remote reset button is provided as standard equipment to zero the lower Intermediate display. Controls on the meter will zero both Total and Intermediate values whilst also able to freeze the Total display. In addition the Total can be stepped, fast or slow, to any reading to align with the rally organisers road book if a deviation from the intended route has been made. |
|
|
|
||
|
Sizes
in mm |
£150.00 |
|
|
BR7 - Brantz |
Brantz International 2 'S' Pro Tripmeter The International 2 'S' Pro is the natural progression from the formidable International 2 rally tripmeter. The unit features the same highly visible LED display, with the addition of a highly accurate speedometer. The technical specification is similar to the International 2 unit, with the additional speedometer able to calculate and display both current and average speed |
|
|
|
||
|
Sizes
in mm |
£185.00 |
|
|
BR34 - Brantz |
Brantz Laser 3 Tripmeter
The Brantz Laser 3 provides the greatest degree of competitive edge in professional level rallying. The Brantz Laser 3 Rally Computer is a sophisticated high precision instrument which shows via red LED readouts Time of Day including hundredths of a second and has two stopwatches. Six digit distance (to three decimal places) is viewed via shiftable four digit windows. Speed information includes current, maximum and average speeds. A leap forward in technology allows optimisation of car performance tuning using the acceleration figures to 60, 100 and 120 mph and kph from 0, 30, 50 and 70 mph and kph, along with times for a standing start quarter mile or kilometer, and a standing start mile or kilometer. A programmable digital fuel gauge is provided which will read a gauge which stands unpowered, or is already part of a vehicle's electrical system. |
|
|
|
||
|
Sizes
in mm |
£230.00 |
|
|
BR20 - Brantz |
Laser 3 Drivers Repeater Monitor
Laser 3 Driver's Repeater - a precision Multi Function Rally Computer unit In-built wireless remote control unit for zeroing etc Separate Display Screen Driver can monitor speed, distance, fuel etc Laptop data collection port for Stage/Performance analysis |
|
 |
||
|
Sizes
in mm |
£225.00 |
|
|
BR22 - Brantz Laser 3 |
Brantz Laser 3 Radio Remote Zeroing Unit
|
|
|
|
||
|
Sizes
in mm |
£50.00 |
|
|
BR341 - Brantz
Laser |
Brantz Laser 3 Fitting Kit
|
|
|
|
£12.50 |
|
|
BR21 - Brantz Power Booster |
Brantz Power Conditioner - Electrical power supply
conditioning unit
6V to 14V Step up Unit (Inverter)
13.8V output - essential for Historic vehicles! |
|
 |
||
| Sizes
in mm H70 x W50 x D25 |
£35.00 | |
|
BR1 - Brantz |
Brantz Universal Speedometer Cable Sensor
Accepts most Speedometer Cables Colour coded connectors for easy installation OK for all Brantz Tripmeters |
|
|
|
||
|
£25.00 |
||
|
BR2a - Brantz |
Brantz Probe Sensor M12 x 1mm thread
N.B. Will not operate old meters (pre 2004)
A return to base modification is available on these meters to allow the use of new sensors. |
|
|
|
||
|
£25.00 |
||
|
BR4 - Brantz |
Brantz M18 x 1.5mm thread, screw onto gearbox
output, with 'square' drive
Check the gearbox output size prior to ordering May need minor mods Fits most Ford/GM/Vauxhall/VW/Skoda/Lada/Fiat Pre-wired ready to fit OK for all Brantz Tripmeters |
|
|
|
||
|
£35.00 |
||
|
BR3 - Brantz M22 Gearbox Sensor |
Brantz M22 x 1.5mm thread, screw onto gearbox
output, with 'lug' drive
Check the gearbox output size before
ordering. Sq drive may need minor modifications. |
|
|
|
||
|
£25.00 |
||
|
BR5 - Brantz |
Dividing prescaler interface for digitally pulsed electronic speedos
|
|
|
|
||
|
£55.00 |
||
|
BRH2 - Hall
Effect Sensor |
Hall Effect sensor and two magnets with holders and shaft fastners.
|
|
|
|
||
|
£80.00 |
||
|
BR43 - Brantz Plug Kit |
Brantz - Plug Kit Allows sharing your Tripmeters (Retrotrip or Brantz) between vehicles and removal for security. |
|
|
Only available when ordering new unit |
||
|
£25.00 |
||
|
BVTC01 - Timer |
Variable
Timebase Clock (Electronic Speedtable)
Historic Rallying Events - Average Speed Fits in the pocket much better then old fashioned average speed tables!
|
|
|
|
||
|
£165.00 |
||
|
BR32 - Brantz Rally Clock |
Brantz Rally clock Pro - LED digital clock and stopwatch The
BRANTZ Rally Timer is built at the same height and with the same bright
red digits as the BRANTZ Internationals and sits comfortably
along side them. The six digit clock shows as 12 or 24 hr formats and
holds the time of day when the remote button (provided as standard) is
pressed. The four digit stopwatch halts at the same moment. The
stopwatch will show cumulative or re-zeroed elapsed time. A special
function will allow the stopwatch to count seconds to 9999 instead of
minutes and seconds if desired. This function is useful for historic
rallying and other events which call for a seconds counter.
|
|
|
|
||
| Sizes
in mm H70 x W100 x D40 |
£110.00 |
|
